|
|||||||
| Reels Who’s using what, find out in here. |

![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
How much PE1 Sunline Castaway on Caldia 2506H?
Hello gents,
First of all, the official PE line capacity for the Caldia 2506H is: PE0.8 - 140, PE1 - 110. I managed to fit approximately 180 m to 200 m of 8 lb Sunline Super PE onto my Caldia 2506H without overfilling it. Although the manufacturer did not state the diameter of the 8 lb Super PE, I think it is roughly a PE 0.8? Therefore the actual line capacity of the reel might be a bit higher? My question for those who have done the same or similar is, will I be able to comfortably fit 150 m of PE1 Sunline Castaway onto the 2506H without overfilling it? |
|
#2
|
||||
|
||||
|
Only one way to find out.
Fill it to your desired amount, I'm sure you won't lose much at all by the sounds of that, perhaps a perfect fit. |
|
#3
|
|||
|
|||
|
Sunline castway 10lb is 0.6
I get the whole 150 on my 2506 luvis If that's what ur referring too and it actually has a breaking strain of about 8-9lb Use an fg knot too get close to ur breaking strain ![]() Use a meter backing on the spool also
|
|
#4
|
||||
|
||||
|
I am considering switching from 8 lb Super PE (approx. PE 0.8) to PE 1 (16lb) Castaway. I have no doubt the 2506 spool can hold 150 m of PE 0.6.
|
|
#5
|
||||
|
||||
|
Quote:
Hence asking people's experience to justify to reason for buying yet another spool of line while I already have like 7 spools of different lines.
|
|
#6
|
||||
|
||||
|
I put a full 150m spool of Unitika Aorika PE1 (10lb) on a 2506 and it all went on but it was way over filled. You might waste 50m odd I'd say.
Last edited by TheChief; 15-03-2014 at 04:12 AM. |
|
#7
|
||||
|
||||
|
PE 0.8 in the Unitika Aorika fits on a 2506 perfectly. 0.6PE does to if you like to be conservative.
|
|
#8
|
|||
|
|||
|
Sorry man I thought the pe 1 and the 1 stands for 10lb ?
|
|
#9
|
||||
|
||||
|
You can actually fit a whole spool of 10lb castaway on a 2004. Ive done it on numerous occasions. You'll find youll have to back the 2506 up a bit. Give yourself about 1mm of the spools depth for the braid. Its very thin.
|
|
#10
|
||||
|
||||
|
I just managed to fit 160 m of Varivas Avant Max Power Jigging PE1 onto the 2506H
![]() The line sits about 1 mm under the rim. I am very surprised... Last edited by The Doctor; 17-03-2014 at 02:34 AM. |
|
#11
|
||||
|
||||
|
By the way, I just did a quick comparison between Sunline Castaway PE2 and Unitaka Shore Game PE2, the Sunline is noticeably thicker. I guess it just proves that the PE system is not exactly a uniformed unit among manufacturers.
|
|
#12
|
||||
|
||||
|
If you have a look on the official Sunline website, they state Castaway is 10-30% thicker than 100% PE due to the polyester fibres. But it does cast further.
You might get 90-100m recommended capacity. I would've gotten the 2508 model with that line. |
|
#13
|
||||
|
||||
|
Thanks for the insight, Miscreant! I didn't know the polyester fibres makes it noticeably thicker. It definitely deliveries a longer cast and I also think it has pretty good abrasion resistance in comparison with other fused and braided lines. My top choice for PE line for sure.
|
|
#14
|
||||
|
||||
|
Unless something technologically new comes out, Castaway will be the only braid I use.
|
|
#15
|
||||
|
||||
|
The new Duel Hardcore X8 is pretty good, too. 100% PE line though.
|
![]() |
|
|