|
#1
21-12-2013, 01:59 AM
|
||||
|
||||
|
Knob upgrade
Hi guys,
Recently i decided to change my SOL 2500 T-knob to an "I" knob. Anyway i ran into some trouble, when i tighten the screw, i can spin the knob freely, just wondering am i missing somthing here :-(! http://imageshack.us/photo/my-images/15/ktk7.jpg/ Cheers :-) Derick Last edited by oz_guy; 21-12-2013 at 02:04 AM. 
|
|
#2
21-12-2013, 02:06 AM
|
||||
|
||||
|
Just have a look at the schematics and make sure everything is lubed and in the right spot.
Also make sure the screw is tightened, but dont go crazy and bugger it Nagz
__________________
tight linez and singing dragz 
|
|
#3
21-12-2013, 02:29 AM
|
||||
|
||||
|
I'll text you a free hand pic later oz-guy to illustrate how to arrange all the stuff.
but firstly if you have too many washers it could be too tight and therefore wont spin freely.. so try no washer first. If you have "knob play" (LOL.funny play on words) then add 1 washer but try the thinnest washer you can find.
|
 |
|
|
Linear Mode
