Zpi knob on 2004 certate

[Megabass]

Hay guys just received my Zpi knob and it does not go right with the 2004 any body got ideas ??

[driftcorp86]

Remove the big spacer then don't over tighten the screw

[redrocket]

Make sure u get the bearing out of the old knob, I'm pretty sure there will be 1 bearing on the shaft at the bottom of the knob and there will also be another in the knob where the screw tightens down.

[Megabass]

Tried it all still not working driving
Me bonkers lol

[keenothebream]

sell it to me then

[Rayman]

Are you using the correct white spacer/collar? You only have to use one per knob... The big white one is if you've got a Daiwa handle. The small white one is if you've got a Shimano handle. And then you just play with the silver washers until you get the desired tolerance.

For Daiwa's

[driftcorp86]

I have a different style zpi knob compared to that so I'm out lol

[Nugget]

I have a zpi metal knob on my 2004 certate. One washer is for shimano the other washer for daiwa reels. I will have a look tomorrow which size I used if you havnt figured it out.

[mitchmcm]

Had one on my 2500 steez and no dice removed it and sold it

[Megabass]

Yer still haven't figured it so let me no plz nugget
Much appreciated.gavin

[driftcorp86]

I like mine takes a bit to get used too personal pref I guess

[Megabass]

Finally got it thank heaps for the help guys.its the silver zpi handle.

[driftcorp86]

Originally Posted by Glx-2004

Finally got it thank heaps for the help guys.its the silver zpi handle.

what did ya end up doing?

[mitchmcm]

Originally Posted by driftcorp86

I like mine takes a bit to get used too personal pref I guess

To small need a bass art knob