Where does this go!?

youngfisherman · #1 23-04-2012, 08:33 AM

Hey guys

Was fiddling around with my electric motor yesterday and had to quickly lift it up as it was going to get beached. As I lifted it up one of the cords pulled out and now it won't turn left or right. I can't find out where this cord goes, can anyone help?

Greatly appreciated.
Todd

Hazell · #2 23-04-2012, 08:51 AM

You'll have to take the covers off and find the matching plug. You'll have to seal it up so it doesn't fall out again.

Bream lust · #3 23-04-2012, 06:54 PM

I'm sure it goes in ''electric trolling motors'' hope you sort it out soon.

josh.

edit... just noticed it already there

youngfisherman · #4 24-04-2012, 02:19 AM

Righto then

Thanks Hazell.

seamonkey · #5 24-04-2012, 02:33 AM

As Hazell said unscrew and open the covers on the head and you see a two pin socket on the circuit board. There should be some kind of cable clamp to stop the cable being pulled through like that. If not before you screw it all back up put a cable tie around the cable on the inside of the head - should slow you down from doing it again!

youngfisherman · #6 24-04-2012, 02:41 AM

Quote:

Originally Posted by seamonkey

As Hazell said unscrew and open the covers on the head and you see a two pin socket on the circuit board. There should be some kind of cable clamp to stop the cable being pulled through like that. If not before you screw it all back up put a cable tie around the cable on the inside of the head - should slow you down from doing it again!

Thanks gatesy