Drag washer help.

[-Pivot-]

Recently got some drag washers for my Zillion but can't find out how to put them in.
Wondering if anyone knows how to do so?
cheers,

-Pivot-

[DaiwaFreak]

Take off the sideplates, you will see the drag stack on the main gear. Take the lot off and replace the old ones with the new ones.

Cheers,

Daiwafreak

[stelmo]

if you goggle fishing reel schematics and type of reel you should get complete brake down of the reel

[alphas]

Remove the handle,underneath there will be various washers that have to be removed as well.
If it is your first time,lay them out as they come apart the same way as you remove them,as it is critical that they go back the same way.
Then remove the sideplate and it will look similar to this(although this pic is of a I'ze light millionaire)


The drag assembly sits inside the main gear(big gear in pic)
Pull it off of the main shaft and remove the washers and replace whats needed.

[-Pivot-]

Thanks everyone & Aplha's for the pic's really appreciated.
Got them on this morning, feels very smooth, almost too smooth for my liking
Thanks again,

-Pivot-

[try to fish]

did you get the carbontex washer?.also theres another silicone washer beneth the main gears that should also be upgraded to feels the full effects of these cf washer.yes,they van be installed dry but a lightly coat of cal's drag washer grease is also a better option than dry.

[-Pivot-]

I've heard about the cal grease, where can I get some? Does it make much a difference once its greased?

-pivot-

[Meh?]

Smoother, less start up pressure.

Read this:
http://alantani.com/index.php?topic=47.0