Go Back   Bream Master Forums > Bream Boats > Hulls

Hulls Come in here to find info on that next boat you buy…



 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 18-02-2019, 04:37 AM
yellow door 1's Avatar
yellow door 1 yellow door 1 is offline
LEGEND Unicorn
 
Join Date: Jan 2004
Location: melbourne
Posts: 14,006
Quote:
Originally Posted by IceManDude View Post
Yeah the 130L tank will keep it going for quite a while, especially when a lot of the fishing will be done under electric power.

I'll be doing a number of walk arounds, i just need to get it outside as there isn't enough room in the shed for anything let alone a walk around...

I'll be putting a 90 on the back, recommended is 70 - 90 however if i wanted, and with some redesign (approved by the engineer) i could go a 115 (like another builder has) but i really have no need.
Yeah the bigger the engine the more fuel you'll burn - even at idle. And the more horses you have - the more likely you are to use them

Wide open throttle burns 3 times more fuel than half throttle - but it might not make you go 3 times faster - so its worth doing the maths on ideal cruising speeds to make sure you get the best out of those 130l......or you can just jam the throttle down at the start of the journey and hang on

Heres a fuel estimator for a variety of brands - its annoying they dont show the speeds the boat is traveling at - I'll keep searching - but I've heard that 3500 rpm is a good amount of revs to cruise on for fuel consumption - obviously it would be different for different boat engine combos but if you arent in a hurry - no need to burn juice unnecessarily


http://www.boat-fuel-economy.com/mer...umption-liters

Last edited by yellow door 1; 18-02-2019 at 05:07 AM.
Reply With Quote
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -4. The time now is 06:20 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Google