problem with limited editon t3

[breaming125]

hi all

I just pick up my yellow limited edition t3 from my local tackle shop, as i got home i had a little test run and i noticed my line was hitting the body of the reel just under the t wing, as i would start slow rolling, is this ment to happen as it started to cut into my braid.

as anyone had this happen to them or how can i fix it

[I I Wish]

Post up a pic if you can of the problem.

[Partizan Fk]

I have the same reel and have no dramas.Post up a few pics so i can see what you have done.

[breaming125]

there is no damage from what I can see but I can see my line touching the body it only happens when the rod is load up

[Partizan Fk]

If its what im thinking its the lid that lifts when you cast and closes if so mine touches in some places im not phased i haven't noticed anything to be of concern if you are run some tape along the edge.Good reel mate you will enjoy otherwise

[chris268]

I saw a thread or two about this issue on the tackletour forum. Under heavy load, braid would make little grooves in that area and eventually the line would catch those grooves during retrieve. Hopefully Daiwa have made that part of the reel more durable. Here's some info/feedback off the tt forum.
http://forums.tackletour.com/viewtop...43376&start=45

[breaming125]

ok thanks for the info

[nagz]

They may have made that part of the reel more durable, but what about the durability of your braid, ie the part that connects you to the fish, when it continuously makes contact with your reel?
I'd offload it before you lose a fish of a lifetime. Plenty better reels out there

[breaming125]

they have put a plate the so your braid doesn't get any weak spots