|
|||||||
| Motors Get the low down on which outboards perform best… |

![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Tips on maintaining my Yamaha
Hi all,
Just want some tips on how you maintain your engine after every time you have a outing. I'm still very new to boats and just bought my first boat a week ago! It's a ally craft 410 and has a 2001 4 stroke 30hp on it! I no I should water it down and flush the engine! Should I take the cowling off every time and spray the enigine with wd40 or lanox? I see there's some salt under the cowling on the engine what's the best way to clean it all off? Interested to hear your tips and tricks. Thanks all. |
|
#2
|
||||
|
||||
|
I wouldn't spray anything on the motor, it'll just make DohDohDohDoh stick to it
![]() a spray of silicone on the cowling and wipe with microfiber cloth will stop salt sticking and keep it looking good though
|
|
#3
|
||||
|
||||
|
Keep about 50cm of 60lb mono so whenever you drive in shallow water and get stuck on the sand you can feed it up the pipe the water comes out off. It's amazing how easy sand gets stuck up there.
__________________
Soon To Be Building Up A Custom 399 Stacer Proline
Pflueger Trion 2-4kg & 3-6kg | Shimano 2500 Stradic c14 (10lb) & Dawia Sol 3000 (14lb) | Berkley Dropshot 1-3kg | Shimano Symetre 1000 (alb) PBs - Flathead: 91cm - Bream: 38cm - Whiting: 37cm - Snapper: 40cm |
|
#4
|
||||
|
||||
|
Haha, thanks mate sounds like a good idea! Sounds like its happened to you a few times lol. Thanks for the replies.
|
|
#5
|
||||
|
||||
|
A bit of water resistant grease (Valvoline is alright) on pretty much every moving part and a bit of inox will do nicely. A gear box oil change every couple of months is good too. The most important thing is washing it out with fresh water for 2-3 minutes.
Josh, |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|