|
Bream Anglers Tavern Drop in here if you're just surfing with a beer in your hand. Good place to just hang out... |
|
Thread Tools | Rate Thread | Display Modes |
#16
|
||||
|
||||
|
#17
|
||||
|
||||
I think the Pros Soft Bait glue is the stuff I need
Last edited by yellow door 1; 14-04-2019 at 05:35 AM. |
#18
|
||||
|
||||
Pros Soft Bait glue
Who sells it and for what $$,i couldn't find it under $40 |
#19
|
||||
|
||||
Quote:
https://www.tacklewarehouse.com/PROs...page-PSBG.html Last edited by yellow door 1; 14-04-2019 at 06:29 AM. |
#20
|
||||
|
||||
Quote:
image1.jpg image2.jpg image3.jpg But holding for 10-15 seconds creates a firm bond. image4.jpg Waited another 20 seconds or so and did the stretch test. image5.jpg Rock solid, cant break the join.
__________________
Hey Bear, let me out... |
#21
|
||||
|
||||
406 to jighead
Same sort of time to attach to the jighead, hold for about 10-15 seconds
image1.jpg Leave it for about the same again image2.jpg Can't pull the tail away from the head join, and I usually have trouble getting Z Man tails to stay hard up against the head of the hook. Extreme stretching created some stress at the original cut, but only on the outside, join held firm.
__________________
Hey Bear, let me out... |
#22
|
||||
|
||||
Champion effort Mark - thanks for that - yeah the 406 seems to work a bit quicker than than the 401 and precision
|
#23
|
||||
|
||||
Quote:
TW1.JPG +GST + Postage ($10US cheapest) TW2.JPG Makes it expensive lure glue
__________________
Hey Bear, let me out... |
#24
|
||||
|
||||
Alright lets move onto plan "B"
|
#25
|
||||
|
||||
.
|
#26
|
||||
|
||||
Perfect
4090 is a two part superglue/epoxy hybrid that comes in a special, syringe type mixer/dispenser for $85.
I can see how easy that will be to use on a rocking boat in windy conditions https://www.youtube.com/watch?v=TcCWl6SymvU
__________________
Hey Bear, let me out... Last edited by Mark M; 16-04-2019 at 09:06 PM. |
#27
|
||||
|
||||
Quote:
I've ordered some 406 to see how that compares |
#28
|
||||
|
||||
I use superglue to glue placcys onto jigheads, not really fussed which one I use as they've all worked. but for tear repairs I use mend it as I it retains the consistency of the placcy, whereas superglue joins are hard. Down side mend it is hard to find in Aus and it gets claggy to unuseable over time.
Has anyone used the "Soft Bait" glue? is that like a hard superglue join?
__________________
May all your evenings rise |
#29
|
||||
|
||||
As for the most popular would have to be the loctite gel control
https://www.bunnings.com.au/search/p...directFrom=Any |
#30
|
||||
|
||||
Quote:
|
Thread Tools | |
Display Modes | Rate This Thread |
|
|