Go Back   Bream Master Forums > Bream Tackle > Lines

Lines Fireline vs the rest…who wins?



Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 03-01-2018, 09:10 PM
matt jorg's Avatar
matt jorg matt jorg is offline
Blue Lip
 
Join Date: Jul 2011
Posts: 1,791
Abrasion resistance in braid

Hey all, any opinions on type and brands for best abrasion resistance?
Eg fused styles vs x4 or x8 PE etc.
I want a smooth casting line that won’t evaporate if it touches an oyster rack!
Cheers matt
Reply With Quote
  #2  
Old 03-01-2018, 11:27 PM
90sBlackjabiru's Avatar
90sBlackjabiru 90sBlackjabiru is offline
Poddy Bream
 
Join Date: Aug 2017
Location: nr. Woodend - Victoria
Posts: 49
Well I picked up some Aldi braid a while ago....tested it against four brands costing $60 -
-$106 per spool. The four broke after 8- 16 runs over a piece of wet gum in a vice....absoluteley gob smacked the Aldi braid took 36-38 to fail.

Thrown me completely out of whack about diameter and cost
Reply With Quote
  #3  
Old 04-01-2018, 07:52 PM
gsenaeef67 gsenaeef67 is offline
Poddy Bream
 
Join Date: Jun 2014
Posts: 96
I'm gonna have a punt here. Without having done any testing of any sort besides fishing experiences, I'd say the rougher the braid is, the more resistant to abrasion it is. More limp and smooth braid seems to be prone to breakage when coming into contact with sharp surfaces.

Also, more expensive braids could be less abrasion resistant than cheap braid because cheap braid is often rough and well over the breaking lb ratings indicated which means they are even thicker.
Reply With Quote
  #4  
Old 04-01-2018, 08:54 PM
matt jorg's Avatar
matt jorg matt jorg is offline
Blue Lip
 
Join Date: Jul 2011
Posts: 1,791
I agree with that punt I reckon you’re onto it there. I guess throwing 12 strain pe around racks is a silly idea anyway so cheaper the better
Reply With Quote
  #5  
Old 05-01-2018, 04:59 AM
90sBlackjabiru's Avatar
90sBlackjabiru 90sBlackjabiru is offline
Poddy Bream
 
Join Date: Aug 2017
Location: nr. Woodend - Victoria
Posts: 49
Chatting with a tackleshop owner about my findings.... he gave me a sample of jbraid!!! Got fed up with sawing it backwards and forwards😞with no sign of wear......
Just adds to my confusion 😁
Reply With Quote
  #6  
Old 05-01-2018, 05:23 AM
stella fella's Avatar
stella fella stella fella is offline
Blue Lip
 
Join Date: Aug 2011
Location: Lake Mac
Posts: 3,129
More expensive "high end" braids are thinner than bargain bin crap of an equivalent breaking strain, so you're usually better off just going with a thicker expensive braid than cheap stuff. I don't think the term "abrasion resistance" belongs anywhere near the list of properties that braided lines have in any case. doesn't matter if you're running 4lb or 12lb, if a good bream gets you wrapped in an oyster rack you're done.
__________________
"Fishing relaxes me. It's like yoga, but I still get to kill something."
Reply With Quote
  #7  
Old 07-01-2018, 10:49 PM
matt jorg's Avatar
matt jorg matt jorg is offline
Blue Lip
 
Join Date: Jul 2011
Posts: 1,791
What about a cheap and cheerful line like Fireline Exceed?
With no micro fibres and coated surely it’ll be better than a Jbraid type line?
I’m not after casting distance just something to flog and be up to a bit of punishment...
Reply With Quote
  #8  
Old 08-01-2018, 09:09 AM
gsenaeef67 gsenaeef67 is offline
Poddy Bream
 
Join Date: Jun 2014
Posts: 96
Sounds like it would do the job. What about Power Pro? Relatively cheap, extremely strong and tough.
Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -4. The time now is 01:09 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Google