|
Getting Started If you’re new to the Sport then this is the forum for you. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
assists hooks-size
hi again ,
sorry dumb question here, can someone help me with the size of assist hooks i need to purchase to suit a whiting surface lure,(bass day sugar pen.) thank you paul |
#2
|
||||
|
||||
Quote:
https://isofishinglifestyle.com.au/c...t-hook-size-10 Last edited by yellow door 1; 23-01-2019 at 01:50 AM. |
#3
|
||||
|
||||
Hook sizing
I have always had problems with a standard sizing, as I find manufacturers vary. The hooks Larry linked are Atomics and the blurb says "size 10" ?
Atomic hooks.JPG For my whiting lures in the past, I have used the Ecogear ZX spares, but the pack doesn't list a hook size. In the pic below the top two are ZX, the purple ones from a BM member who sells on ebay ($9 for 10 posted) and the bottom set is from Oceans Legacy, which are listed as #6. They are all the same size. no UV.jpg I actually prefer the #4 from Oceans Legacy for my whiting now (no pic sorry, run out), smaller and seems to get better hookups. This brand also include UV threads..and a far superior build quality. UV.jpg The purple ones you can get from Crabcrusher (BM name), also sells a slightly bigger set for bream, on ebay, here: https://www.ebay.com.au/itm/zx-style...rdt=true&rt=nc
__________________
Hey Bear, let me out... |
#4
|
||||
|
||||
Nice one Mark - and that point you make about different sizing is well worth making - it doesnt take much weight to turn a floater into a suspender and a suspender into a sinker.
If the rings are too big or the hooks too heavy - it may change the action of the lure - so its worth keeping an eye on how the lure performs with new hardware |
#5
|
||||
|
||||
jury is out for me on assists,so far there aint much if any benefit
cheers nereus
__________________
H/B 45cm and keeping at it S/P 53cm should do more really vibe 45cm i'm liking em Surface 39cm and work in progress H/B mully 83cm and not so bitter S/P mully 85cm on 4lb FC |
#6
|
|||
|
|||
assist hooks
thanks so much for the reply
|
#7
|
||||
|
||||
I tie my own assists using Daiichi 2171-B hooks in mostly size 6, but do tie 8's for smaller than usual lures. All the pre-made ones I've tried seem to have extremely brittle hooks and the points keep snapping.
Old spinner baits are handy for the dangly rubber bits.
__________________
[SIGPIC][/SIGPIC] |
#8
|
||||
|
||||
Quote:
the videos I've watched use really simple knots with a dab of super glue - and heat shrink over the knot for the really heavy line classes And Budget - If you do decide to make your own and dont have any old spinner baits lying around - you can just buy the skirts on ebay or ali express - the ones below are $3.10 USD or ($4.34 AUD) for 12 bundles on ali express https://www.aliexpress.com/item/12-B...b9f8ad89724d-0 Last edited by yellow door 1; 23-01-2019 at 06:59 PM. |
#9
|
||||
|
||||
or these dudes on ebay sell in single lots for $1
https://www.ebay.com.au/itm/Lots-Fis...frcectupt=true |
#10
|
||||
|
||||
[QUOTE=yellow door 1;694010]Yeah I like the sound of that - what knots do you use to attach the hooks - and what do you make the assist cord out of -
Good find on the spinnerbait tails. I know some guys just use plain old rubber bands. I use old braid I have laying around, anything between 30 and 50lb works for me. I don't know the name of it but its a knot my dad taught me years ago that's kind of a cross between a snell and a nail knot. 1: Place the line through the hook eye and lay along the shank 2: Pinch line to hook shank down near the bend leaving about 100mm tail 3: Leaving a loop between your fingers down at the bend, wind the line 4 or 5 times around the shank and braid back towards the hook eye. 4: Place the tag end through the loop and pull up tight. Hope that makes sense. Its kind of like a snell but its locked off better.
__________________
[SIGPIC][/SIGPIC] Last edited by Green Hornet; 23-01-2019 at 08:41 PM. |
#11
|
||||
|
||||
[QUOTE=Green Hornet;694012]
Quote:
Thanks for the info on the Braid and the knot used. The knots I've seen are are super simple - yours sound a bit more trust worthy Last edited by yellow door 1; 23-01-2019 at 09:25 PM. |
#12
|
||||
|
||||
[QUOTE=yellow door 1;694013]
Quote:
If you recall we were discussing assist hooks on larger metal lures a while back. I use 100lb assist cord for them and attach to the hook double thickness with a simple thumb knot and bind the tag to the shank with a bit of fly tying thread. A drop of super glue locks it all in place and I've never had one fail. More traditional fishing knots don't work with the cord because its roughly textured and doesn't slide like mono or braid.
__________________
[SIGPIC][/SIGPIC] |
#13
|
||||
|
||||
[QUOTE=Green Hornet;694014]
Quote:
|
#14
|
||||
|
||||
I use the ready made Decoy DJ54 Dancing Jack assist hooks for whiting. I use them on the atomic pop 50 and the sugapens . Use the size small (S) the smaller size (SS) are just too tiny and don't hang on to the fish. They are super sharp and hardly ever lose a fish once hooked up.
|
#15
|
|||
|
|||
assist hooks
hi there and thank you for the information,as luck would have it i went to the fishing shop they recommended exactly as the good dr. has suggested.cant wait to give them a try.
|
|
|