|
Reels Who’s using what, find out in here. |
|
Thread Tools | Rate Thread | Display Modes |
#1
|
|||
|
|||
Original Daiwa TD Sol 4000 bearing sizes
Been lucky enoungh to score one of these brand new off gumtree and want to do some upgrades before I use it. Going to put ceramic bearings and carbontex wanders in it to start. Could someone please help me with the bearing sizes. Have searched high and low but to no avail. Thanks Paul
|
#2
|
|||
|
|||
Quote:
http://www.spin-review.ru/reels/daiw...D-SOL-4000.pdf what part number are you looking for for he bearing? |
#3
|
|||
|
|||
Agreed Avet4life but those numbers are Daiwa specific and when I have given that info to the likes of Plaig Bearings those numbers don't mean anything or give indications of size. Please correct me if I am wrong.
|
#4
|
||||
|
||||
Borrow or invest in a decent of digital vernier calipers and measure them yourself. something like these will do the trick https://www.justtools.com.au/kincrom...caliper-k11100.
Not the cheapest but look after them and they'll last a life time. Either that or you could try sending Slazmo a pm and if you're lucky he might have the sizes.
__________________
[SIGPIC][/SIGPIC] |
#5
|
||||
|
||||
Sol shares a lot of internals with the old Certate, maybe you can get some info here:
http://daiwafishing.com.au/services/...el-schematics/ Looks like bearing part #s are the same for the 4000 models. #47-G522801 (#46 Certate) #17-G467101 #62-G523401 (#74 Certate) You can get bearing sizes from here: http://roulementcasting.com/schema-daiwa-certate-4000/ Click on the hyperlink (orange) to the part number and it will show you the bearing sizes. Cheers Mark
__________________
Hey Bear, let me out... |
#6
|
|||
|
|||
Quote:
Paul, if you can't source the bearings elsewhere PM me and I should be able to help. As GH suggested, best if you can mic the originals to be sure. cheers Steve Last edited by t303; 25-09-2017 at 05:20 PM. |
#7
|
|||
|
|||
Thanks for the information Mark M. Awesome link. Just what i was looking for
|
#8
|
|||
|
|||
Daiwa Td Sol Baitcaster
Have now scored original Td Sol Baitcaster in new condition. Can anyone supply me the bearing sizes for this as I am going to upgrade to ceramics before I use it. Thanks Paul
|
#9
|
|||
|
|||
Quote:
3x8x4 8x12x3.5 (x2) 5x8x2.5 (x2) I think there is another one on the spool, I haven't got a size on that, maybe a 3x10x4. as always, best to get them out and mic them. cheers Steve Last edited by t303; 28-10-2017 at 03:31 AM. |
Thread Tools | |
Display Modes | Rate This Thread |
|
|