Go Back   Bream Master Forums > Bream Tackle > Reels

Reels Who’s using what, find out in here.



Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 07-03-2019, 03:53 AM
bond's Avatar
bond bond is offline
Poddy Bream
 
Join Date: Jul 2010
Posts: 45
Cretate magseal line roller

Hi guys....bought a used 2016 certate 2510pe-h.
Line roller jam up so try to service myself.

1) First, is the items orientation in correct order?
2) Magseal bearing is expensive, so i will buy normal
ball bearing to replace it...is it ok?
3) If i use normal bearing, do i need to remove the 2 pcs
of magnetic washers?

Thanks for all expert advise.

Last edited by bond; 07-03-2019 at 04:11 AM.
Reply With Quote
  #2  
Old 07-03-2019, 04:14 AM
bond's Avatar
bond bond is offline
Poddy Bream
 
Join Date: Jul 2010
Posts: 45
Line roller
Attached Images
File Type: jpg certate roller.jpg (72.5 KB, 4 views)
Reply With Quote
  #3  
Old 07-03-2019, 08:29 AM
bond's Avatar
bond bond is offline
Poddy Bream
 
Join Date: Jul 2010
Posts: 45
The above orientation is different from the schematic too....

http://www.spin-review.ru/reels/daiw...e_2510pe_h.pdf
Reply With Quote
  #4  
Old 08-03-2019, 05:01 AM
sevric's Avatar
sevric sevric is offline
Mature Bream
 
Join Date: Jul 2014
Location: Port Macquarie
Posts: 237
Best option would be to replace the bearing set up with an original set however i get your drift with the price from Daiwa. Never had to replace one myself and not looking forward to when i have too.
If you replace with standard bearings i would loose the magnetic bearings and washers and keep the 2 spacers and end cap pieces. I would then take it to a bearing specialist and get them to measure exactly what you need to fill the vacant space keeping your fingers crossed all the time.
__________________
Regards to all Dick
Reply With Quote
  #5  
Old 10-03-2019, 09:35 PM
bond's Avatar
bond bond is offline
Poddy Bream
 
Join Date: Jul 2010
Posts: 45
Thanks a lot Sir
Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -4. The time now is 04:23 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Google