Go Back   Bream Master Forums > Bream Lures > Flies

Flies The place to be if you chase them on the magic wand.



Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 06-06-2018, 10:00 PM
Windknot's Avatar
Windknot Windknot is offline
Big Bream
 
Join Date: Jul 2010
Location: Surf Coast Victoria
Posts: 964
Bent minnow fly?

I've caught hundreds of bream on bent minnow lures. It has been one of my go to lures during the warmer months. Not only are they very effective, to my mind, nothing beats catching bream on the surface.

I love my fly fishing too. If you think catching bream on lures is a challenge and you like a challenge then give fly fishing for them a go.

After doing extensive research on the subject, I haven't been able to find a fly that even comes close to duplicating the action of a bent minnow lure, so I decided to try to come up with my own design.

It has been an ongoing project. I make and test a certain design, only to think of something that will make it work or look a little better.

Anyway, this is my latest attempt. It works pretty well, but it has just a fraction too much buoyancy.
Attached Images
File Type: jpg SAM_1079_Converted_0001.JPG (109.8 KB, 86 views)
File Type: jpg SAM_1080_Converted_0001.JPG (110.3 KB, 88 views)
File Type: jpg SAM_1081_Converted_0001.JPG (100.5 KB, 87 views)
Reply With Quote
  #2  
Old 06-06-2018, 11:33 PM
BloodWorm's Avatar
BloodWorm BloodWorm is offline
Blue Lip
 
Join Date: Aug 2010
Posts: 2,296
Now that is one out of the box.

Nice thinking, hopefully you can pin a few once things warm up.
__________________
Supporting The Jig Man
Reply With Quote
  #3  
Old 07-06-2018, 07:36 PM
nagz's Avatar
nagz nagz is offline
Blue Lip
 
Join Date: Mar 2010
Location: Sh!tney
Posts: 3,379
This is great

I tried a similar idea using a bunch of solarez thick hard but I couldn’t maintain the bend
__________________
tight linez and singing dragz
Reply With Quote
  #4  
Old 07-06-2018, 09:25 PM
Windknot's Avatar
Windknot Windknot is offline
Big Bream
 
Join Date: Jul 2010
Location: Surf Coast Victoria
Posts: 964
Thanks for the kind comments. Every one I tie is just a little better than the previous one. It's an evolutionary process.

To get the bend, I started of with a long shanked size 1 hook, which I bent in the vice. The bend was in line with the gape of the hook. I tied the tail on, which was cut from a piece of flat silicon and then I tied the 2 assist hooks and the red silicon legs. I then tied the fly in much the same manner as a surf candy fly. I wanted the fly to be much wider than thick, so I built up the layers horizontally only, from each side of the hook shank. The flotation is some 6mm foam that was cut to shape and glued on with super glue. Lastly, I cut the size 1 hook at the start of the bend, as it didn't want it interfering with the assist hooks.

I have tried the fly out. It spins when casting, so I fitted a tiny snap swivel onto my leader which prevented line twist. It rights itself on the water every time. With a sharp retrieve it dives down, but it's too buoyant and it pops right back up again. My next one will have less foam.
Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -4. The time now is 02:35 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Google